Blueair

 

 

 

our products filter subscription program sales and service   About Us
Product Features

The SunStar Corcho line has been designed with many options and features including:

  • Manual & Themostat Models
  • ODS & Flame Failure Safety Features
  • No Electricity Needed-Works Even During Power Outages
  • Wall Mount or Floor Mount, As Needed
  • Optional Blowers Available With Manual or Automatic Models
  • Can Be Installed In Mobile Homes As Permitted By State and Local Codes
 
Product Specifications

Model Number

CK-6 CK-10 CK-18 CK-30 CBF-18 CBF-30
Max BTU Input/NG 6,000 9,500 18,000 30,000 18,000 30,000
Max BTU Input/LP 6,000 9,500 16,500 27,000 18,000 30,000
Heater Type Infrared Infrared Infrared Infrared Blue Flame Blue Flame
Dimensions:
Width 13" 13" 19 1/4" 26 3/4" 16" 26 3/4"
Depth 5 3/8" 5 3/8" 9 1/4" 9 1/4" 5 3/8" 9 1/4"
Height 20 7/8" 20 7/8" 23 3/4" 23 3/4" 26" 23 3/4"
Shipping Weight 13 lbs. 13 lbs. 24 lbs. 32 lbs. 22 lbs. 28 lbs.
Temp. Control Options:
Manual Yes Yes Yes Yes No No
Thermostat No Yes Yes Yes Yes Yes
Min. Clearance from Combustible Material:
Top 36" 36" 36" 36" 36" 36"
Sides 6" 10" 13" 13" 6" 13"
Bottom (wall mount) 2" 2" 2" 2" 2" 2"
Accessory Options:
Floor Stand Yes Yes Included Included Yes Included
Blower/Fan No No Yes Yes Yes Yes
Notes: All heater models are available for either Propane (LP Gas) or Natural Gas. Please specify. Each model has a non-electric
top-mounted piezo ignition system. On models CK-18, CK-30 & CBF-30, a floor mounting kit is included with each heater.
The suffix "T" is used to designate thermostatically-controlled models. There is no bottom clearance when heaters are used with the appropriate floor stand.
Accessories
Optional Floor Stand
Optional Blower Accessory

All SunStar Corcho heaters mount easily to almost any wall. Models CK-6, CK-10 & CBF-18 require the optional floor stand pictured above.

No optional floor stand is needed for models CK-18, CK-30 & CBF-30 to be placed on the floor.
Blower above is for models CK-18, CK-30 & CBF-30. Each blower is available in either manual control or an automatic thermostatically controlled model.

To improve the distribution of the warmth throughout the room, most SunStar Corcho models accept an optional blower or fan accessory.

For Your Safety
Installation must be done by a qualifed service person. This installation must conform to state and local codes. In the absence of
local codes, the installation must conform to the latest edition of NFPA54/ANSI Z223. See your dealer for additional information and thoroughly
read the Owner Manual before installing and operating this heater.